Why is the spring machine out of control? what is the reason?

Spring machine manufacturers tell you that most spring machines are controlled by AC servo and computer spring machine control systems. At present, there are many controllers produced by unqualified manufacturers on the market, which use one of the two methods of speed control and position control systems for management and control. For the spring machine operation management system, the development is out of control, that is to say, the defects mentioned by the shunting master cannot randomly appear in the upper computer when controlling the position, and cannot randomly appear in the upper computer when controlling the position. The speed can be controlled. , so it is difficult for us to solve. The main reason is that the spring machine manufacturers have some problems caused by the loss of control of the spring machine:

The following are the main causes of loss of speed control:
1. Power problem:
2. The servo control motor passes through the encoder echo and related circuit execution problems;
3. There are some problems in spring processing programming;
4. AC servo circuit board and related circuit problems;
5. Various control cables and terminals.

In order to improve the performance and service life of the spring machine, the bearings and gears of the mechanical parts should be compared with advanced heat treatment technology. The machine is easy to debug, the product is stable, the production speed is fast, the efficiency is high, the volume is small, and the weight is light.