What's the solution to the compression spring machine card line?

The solution to the clamping wire of the compression spring machine, due to the incorrect quality of the cable product or the operation process, it is easy to cause the clamping wire of the compression spring machine shaft. If the mandrel is blocked, not taking out the stuck spring steel immediately will affect the normal operation of the compression spring machine, so how to solve the problem of the blockage of the compression spring mandrel?

The mandrel of the compression spring machine consists of itself and the tail clip. The solution for the clamping line of the compression spring machine, in which the mandrel itself is a semi-circular sector structure, basically see 165° and 120° angles. and many more. ; The tail clip can be divided into two structures, the whole and the two halves, which can be pulled out from one end of the mandrel at will. The key function of making full use of the equipment is that the compression spring machine has auxiliary disconnection and partial wire feeding straightening when it is working. It is an indispensable auxiliary software for the compression spring machine in the forming process. Line Condition Solutions:

1. First turn off the power switch of the spring press machine, break the stainless steel wire on the rear wire feed roller, then remove the mandrel from the front human body control panel, and try to take out the tail of the mandrel.

2. If the end clip can be removed, the mandrel itself is stuck. At this point, the stainless steel wire can be clamped with pliers, try to pull the wire from one end, or try to drip into the mandrel. some liquid grease.

3. If the end clip cannot be removed, it means that the mandrel end clip may be stuck. The solution to a jammed wire in the spring press is to try to grip the end clip with pliers and then pull it back. Take out the tail clip. If it is a tail clip that is deformed into two halves, just pull the tail clip out. If it is an integral tail clip, you must find a way to remove the stuck stainless steel wire or replace it with a new tail clip, so that the blockage of the non-compressed mandrel can be solved.

4. The spring grinder is used to additionally cut the two inner holes of the compression spring. CNC lathes have upper and lower grinding wheels, and the spindle is on the same axis. The upper and lower grinding wheels are independently driven by two motors. The wheel travel is actually also operated separately by the two handles. The feeding tray is independently driven by an electromagnetic speed regulating motor, and the cutting speed can be changed by a manual wheel when starting. CNC lathes are equipped with wheel refurbishment equipment for immediate refurbishment of the inner bore of the grinding wheel for stronger actual cutting results.

5. The main shaft box and part of the tooth pitch of the compression spring machine are driven by the AC servo motor to rotate the main shaft and move vertically according to the deceleration of the part of the tooth pitch, and some electric equipment adopts a two-axis CNC machine tool.

Applications producing cables should be heated and core coil springs should be selected. The solution for the wire blocking situation of the compression spring machine, which is used to produce the wire rod with the specification of 20~60mm. Companies that produce large quantities of thermal coil springs can apply. CNC lathe structure: It is composed of spindle box, tooth pitch part, forming part, household appliance part and hydraulic machine part. Spring press equipment is more efficient in all manufacturing industries. It is an indispensable spring yellow production equipment. The equipment must be maintained during the application process to increase the application period.