What inspection items need to be done when the spring machine is running?

What should be checked when the spring machine is in operation? The user of the spring machine must be familiar with the structure and performance of each part of the equipment, the functions of various solenoid valves, travel switches, buttons and indicators on the operation panel and the working cycle of the machine tool, and cannot use it beyond its performance.

New machines or overhauled machines must be maintained during the break-in period. For example, when using the universal spring machine during the specified running-in period, it is necessary to gradually increase the load and speed according to the corresponding regulations, and comprehensively check the lubrication and fastening conditions, observe the status of each part of the machine, and solve any abnormalities in time. The key point of running-in maintenance is to replace the lubricating oil of each part, lubricate each part, and tighten each bolt.

When the system is powered on, it should be idling for half an hour first, and then put into operation after the system is stable. Turn the transfer switch to the idling position, check whether the running light is on, if there is any problem, wait for the fault to be eliminated before starting the machine.

The upgrading of spring machines is something that many companies need to do at present, and many spring machine manufacturers are using some old-fashioned mechanical equipment for production, which is not only inefficient, but also the product quality cannot keep up.

If you want to know more about the spring machine, please consult Zhejiang Omnipotent Spring Machine Co.,ltd. for details!