How to solve the warning message on the spring machine screen?

Because there are human factors in the whole process of the daily affairs of the CNC spring machine, such as improper operation (such as system configuration, improper operation) and other factors, it is very easy to cause relevant alarm information on the computer screen, such as "illegal application of this system" The content of the warning information may cause the spring machine to fail to perform all normal operations. Warm reminder from the special machine, if "Illegal application of this system" appears on the computer screen of the spring machine, what should you do?

When the warning message of "illegal application of this system" appears on the system interface of the 08 spring machine (take "open KCT-8C computer spring machine" as an example), the solution is:
1. Turn off the device switch;
2. Press the "ON + Shift key ↑" at the same time, and the "Shift key ↑" must stay for 30 seconds before releasing;
3. Turn off the device switch again, and finally restart the spring machine.

Therefore, during the entire application process of the spring machine, the existence of certain factors, such as improper operation due to human factors, will cause relevant warning information to appear in the interface of the computer spring machine system. At this time, it is recommended to turn off the switch of the device first, and then restart the spring machine to check whether it is repaired. If the warning message still appears in the system interface, please contact the manufacturer immediately to find a solution.

If you want to know more about the spring machine, please consult Zhejiang Omnipotent Spring Machine Co.,ltd. for details!