Do you know how to deal with the power failure of the spring machine?

Many spring machine manufacturers have encountered the situation of going away. How should such a thing be handled? Most spring machines operate under 60 volts. Around 60 volts is not normal and must be handled properly. Let me talk about the universal spring of the manufacturer first:

Use cables to connect the device to the water mains. If the switching power supply has a wiring connector, connect the switching power cord from the bar device. Use an iron rod to make a primer about a meter deep, and connect the two with a cable. If the measured value of the working voltage is 200V ~ 220V, it means that the wiring sheath is damaged. See that the wiring of each fan is not damaged, and then check the device online, the corner board is not damaged. If not, please contact the enumeration method.

If the voltage test value of the enterprise is around 60V~150V, and the switch controls the power supply to trip, a series of electricity will be generated, especially the probability of small machines is relatively high. It is recommended to connect the spring machine to ordinary life electricity.